.jpg)
HEBO®, GASGAS®
RACING PRODUCTS
FOR TRIAL MACHINES
HUGE BLOWOUT OF ALL S3 STOCK IN THE USA WAREHOUSE.
HUNDREDS OF ITEMS IN STOCK
S3 GRIP KIT, GREY OR BLACK
WHILE SUPPLIES LAST, ONLY 31 SETS LEFT!
ONLY $9.50
.jpg)
GASGAS PRO, S3 racing clutch cover kit.
Same as used by Adam Raga. Colors Red or Gold
While supplies last, ONLY 11 LEFT IN STOCK!
ONLY $399.00
(USA SALES ONLY! NO EXCEPTIONS)
S3 racing aluminum footpeg set
Just like Adam Raga uses. While supplies last.
26 SETS SOLD OUT IN 7 DAYS
AT $79.00
(USA SALES ONLY! NO EXCEPTIONS)
S3 TITANIUM EXHAUST FOR SHERCO 2-STROKE
While supplies last, ONLY 8 LEFT!
ONLY $275.00
(USA SALES ONLY! NO EXCEPTIONS)
S3 TITANIUM EXHAUST FOR BETA REV-3 AND TECHNO
While supplies last, ONLY 2 LEFT!
ONLY $275.00
(USA SALES ONLY! NO EXCEPTIONS)
S3 AJP MACHINED ALUM. CLUTCH AND BRAKE M/CYL. COVER SET
COLORS GOLD OR BLACK
While supplies last, ONLY 14 SETS LEFT.
ONLY $39.00
(USA SALES ONLY! NO EXCEPTIONS)
Remanufactured "exchange" cylinder and piston kit.
For all GASGAS trial and Pampera models 1990 to present. *
Kit includes: Re-plated cylinder, new genuine GASGAS piston, piston rings, piston pin, clips, necessary gaskets and seals. Piston pin bearing sold separately.
About the re-plate process: Using a stripped and cleaned aluminum cylinder core, the same nikasil (Nickel Silicon Carbide) plating process as used by the GASGAS factory is applied by a world renowned USA company. The cylinder is then honed and matched to the supplied piston. With this method, the clearances are at absolute factory recommended specifications. For these reasons, we believe a re-plated matched piston and cylinder set is as good or better than new.
Turn around time: In most cases, our USA warehouse has these kits in stock. We typically ship the same day or very next business day after the core cylinder arrives. Overnight service is available at additional charge.
* A reusable matching GASGAS "core" cylinder of the exact year and model being purchased must be supplied in advance. Not suitable for return are cylinders from other brands of motorcycles, other engine sizes, or with damage including internal cracks, broken casting or stripped threads. Without a pre-returned core, a non-refundable core charge applies. (TXT 280 kit shown. Kit contents may vary depending upon application.)
For more information: Dealers
Click on image to enlarge.
.jpg){kind=small}
.jpg)
HI4080
HEBO GASGAS "Pro" flywheel weight kit.
ONLY $159.00
Kit includes spacer for the magneto cover, instructions, and necessary hardware.
Increases flywheel-magneto weight by 728g. ( 1.6 U.S. pounds) Total standard flywheel weight is increased by 20% to 25%.
GASGAS Pro model 250/280/300. 2002~2007 Kokusan or Ducati*
NOTE: (Does NOT fit 125-200 models. Does NOT fit non-Pro model GASGAS or any other brand of trial machine.)
Please read and understand this disclaimer: This racing part is sold as-is and has no guarantee of any kind. This item is non-refundable, and non-exchangeable for any reason. Installation of this item requires some mechanical aptitude. We suggest consulting an authorized GASGAS dealership for installation assistance. Many of these have been sold. Most persons are happy with this product. Some felt that with this product, the throttle response was too slow. As there are so many variables in rider skill levels, perceived benefits, and expectations, it is impossible to predict the results of the use of this product. For these reasons, we do not guarantee specific results or that you will be satisfied with the results of the installation of this product. We do know that installation of this item will reduce the responsiveness of your engine.
* For DUCATI application, minor machining work may be required.
Follow this link to locate the dealer nearest you: Dealers
Click on image to enlarge.
Öhlins RAGA TRIAL SHOCK FOR GASGAS
BT280314004RA
Öhlins® brand Adam Raga rear shock for GASGAS trials bikes. Year 2000 model and newer. Available from GASGAS Trials dealers nationwide.
Special feature: 1.4 lbs (0.63 Kg.) less weight than the original shock, world renowned Ohlins quality.
Follow this link to locate the dealer nearest you: Dealers
Click on image to enlarge.
BY LAW, THIS PRODUCT WILL NOT SHIP BY AIR.
BETA
RACING REAR SHOCK ABSORBER FOR OLDER BETA MODELS (PRE-REV3)
HR6000111
BETA RACING ALUMINUM SHOCK ABSORBER.
(MODELS PRIOR TO THE REV-3)
LIMITED QUANTITIES, DISCONTINUED ITEM. WHILE SUPPLIES LAST
CLICK HERE FOR DIMENSIONAL DIAGRAM IMAGE
ONLY $250.00
BY LAW, THIS PRODUCT WILL NOT SHIP BY AIR.
BT280312002RA
GASGAS (MAGNESIUM) RAGA REPLICA Competition swingarm.
Total weight 1901gr. Weighs 806 gr. less than the standard aluminum swingarm. (-1.77 US Pounds)
Please review the Magnesium bulletin at this link.
Fits all Pro models 2002 to present.*
* Additional parts may be required. These additional components will vary depending on specific model year and application.
Follow this link to locate the dealer nearest you: Dealers
Click on image to enlarge.
MT28031000RA
GASGAS (MAGNESIUM) RAGA REPLICA Competition Engine Center case set.
Total weight 2211gr. Weighs 1,029 gr. less than the standard aluminum center case set. (-2.26 US Pounds)
Fits all Pro engines 2002 to present.*
* Additional parts may be required to use on older model Pro motorcycles. These additional components will vary depending on specific year and application.
Please review the Magnesium bulletin at this link.
Follow this link to locate the dealer nearest you: Dealers
Click on image to enlarge.
GENUINE GASGAS TITANIUM RAGA REPLICA
RACING EXHAUST PIPE
MT280532001RA
GASGAS (MAGNESIUM) RAGA REPLICA Competition Clutch Cover
Fits all Pro engines 2002 to present. *
* Additional clutch actuation internal parts may be required. These additional components will vary depending on specific application, and type of hydraulic oil used in your system. Please specify mineral oil, or brake fluid when ordering parts for this cover. Consult your GASGAS dealer for more information.
Please review the Magnesium bulletin at this link.
Because we want your GASGAS spare parts shopping experience to be easy and enjoyable, we offer file links to assist you in making an informed decision. For more info on installation please visit the link below:
GASGAS Pro
Technical Bulletin (March 27th 2009)
Follow this link to locate the dealer nearest you: Dealers
Click on image to enlarge.
MT280532001CR
GASGAS (ALUMINUM) Clutch cover Kit. (Mineral oil type) *
Easily convert your 2002-03-04 GASGAS Pro to the latest version of the aluminum pressure cast clutch cover. Featuring a redesigned internal structure with strengthening ribs, and anti-cavitation oil dam. New slave piston and pressure seal o-ring design. As used on the Pro model beginning in the 2005 model year.
This kit includes all parts necessary to update your older clutch cover and clutch slave piston. At the same time, convert your clutch hydraulic system to mineral oil. (Fits all GASGAS Pro models 2002 to present)
* Photo shows approximate contents of kit. As always, these items are subject to change without notice. Mineral oil sold separately.
Because we want your GASGAS spare parts shopping experience to be easy and enjoyable, we offer file links to assist you in making an informed decision. For more info on installation please visit the link below:
GASGAS Pro
Technical Bulletin (March 27th 2009)
Follow this link to locate the dealer nearest you: Dealers
Click on image to enlarge.
A few words about the value of the U.S. Dollar in the world money markets.
We believe everyone is aware of the falling value of the dollar. As all of these items are coming from Europe, some of the more costly items on this web site have seen substantial increases in price due to the falling dollar value. For this reason, we have added the Euro prices in parenthesis on some of these items so that you may compare. Having the Dollar at it's initial value when the Euro took effect in the year 2000, the euro price shown would be about the same as the Dollar price or slightly higher.
A FAIR AND POLITE WARNING TO THOSE SPECULATORS WHO THINK THAT THEY MAY SAVE MONEY BY TRYING TO SELF-IMPORT ITEMS SHOWN ON THIS WEB SITE: Please be advised that U.S. buyers attempting to purchase these items in Europe will typically save no money as the payment via credit card will be converted to U.S. Dollars by the card company and the buyer may actually pay higher exchange rates than those shown on this web site in addition to overseas shipping expenses, and questionable credibility of overseas sellers.
Be aware that we do not guarantee in any way, merchandise that is imported into this country by sources other than this company. We are the official authorized distributor of all products shown on this web page. We cannot and will not be held responsible nor can we offer assistance to those who choose to import gray-market items from overseas. From our perspective, persons or companies doing so must be left to their own devices and are ultimately responsible for consequences of any kind resulting from their own actions.