PRODUCTS FOR TRIAL MACHINES
Kokusan Electronic Ignition Kit
Adaptable to GasGas air-cooled models 1987-1992, also suitable for Gas Gas Trial models 1991 to 2000.
This kit contains the stator, a Kokusan CDI and Motoplat coil.
Connects directly to the rectifier, fan and lighting circuits on all GasGas models (Except 'Pro')
Also ideal for classic Bultaco Sherpa T
$649.00
February 2013, We are temporarily out of stock we are waiting for more of the NOS vintage Motoplat coils shown in this image ETA Mid-March.
Leonelli Electronic Ignition Kit
Adaptable to GasGas air-cooled models 1987-1992, also suitable for Gas Gas Trial models 1991 to 2000 and TXT 'Edition' models 2002~2004 as well as all Pampera models.
Connects directly to the rectifier, fan and lighting circuits on all GasGas models (Except 'Pro')
This kit contains the stator with flywheel and a CDI/Coil.
Click here to see wiring diagram for this kit
$769.00
TRIAL AUXILIARY FUEL TANK 1.1 LITER
For most trials motorcycles. (1.16 US Quart)
The auxiliary fuel tank attaches to the front suspension on most trials machines. Perfect for the mountain trials rider. Increase your fuel range as much as 100% with this handy well made accessory. Included with the tank are all necessary parts for a painless installation. You may choose from the unique automatic siphoning system which draws fuel into the main tank via the hose attached to the vent nipple on the main tank. Or simply use the tank for holding extra fuel and remove it via the reusable tie straps, and pour the fuel into the main tank. Instructions included. UNIQUE FEATURE: The flat front doubles as a number plate for those using the Trial machine in competition.
WARNING: THE RESIN USED IN THE MANUFACTURE OF THIS TANK IS NOT DESIGNED FOR USE WITH LIQUIDS FOR DRINKING.
For more information on dimensions and installation please visit the image link at left. <-- FUEL TANK SPECIFICATIONS & INSTRUCTIONS ENGLISH
IN STOCK NOW
ONLY $99.00
MT280532001CR
GASGAS (ALUMINUM) Clutch cover Kit. (Mineral oil type) *
Easily convert your 2002-03-04 GASGAS Pro to the latest version of the aluminum pressure cast clutch cover. Featuring a redesigned internal structure with strengthening ribs, and anti-cavitation oil dam. New slave piston and pressure seal o-ring design. As used on the Pro model beginning in the 2005 model year.
This kit includes all parts necessary to update your older clutch cover and clutch slave piston. At the same time, convert your clutch hydraulic system to mineral oil. (Fits all GASGAS Pro models 2002 to present)
* Photo shows approximate contents of kit. As always, these items are subject to change without notice. Mineral oil sold separately.
Because we want your GASGAS spare parts shopping experience to be easy and enjoyable, we offer file links to assist you in making an informed decision. For more info on installation please visit the link below:
GASGAS Pro
Technical Bulletin (June 8th 2010)
Follow this link to locate the dealer nearest you: Dealers
Click on image to enlarge.
UNIVERSAL
TRIALS footpeg set
Comes with all hardware as shown in image below. Fits most brands and models of Trials motorcycles from the early 1990s to present day. (Fits all GasGas Trials and Pampera, 1992 to present day.)
These footpegs were originally used on the GASGAS Trial models in the year 2008. Years ago all manufacturers standardized the footpeg mount configuration so these will fit almost every brand and model on the market for 20 years.
We invite you to compare our price to our competitors.
These are made of steel with a rugged powder-coated anti-corrosion coating. Economically priced and 100% complete with all necessary parts for an easy and trouble-free installation.
One of our most popular items and a terrific update on older Trial bikes. Replaces the narrow and uncomfortable pegs for better control. It is amazing how much better wide foot platforms really are. Makes a great gift.
* These are the exact same OEM configuration and dimensions as used on all GASGAS Trial bikes since the 1999 model year.
(And Pampera model)
*dimensionally the same but the actual material and color may vary as some GASGAS models use CNC machined aluminum footpegs and some have used micro-fusion stainless steel in assorted colors and shades of gray.
Don't be fooled by the claims of the high-priced Titanium peg sets, they weigh those pegs without hardware! The weight of this complete set with hardware is "probably less than the mud that is typically trapped in your boot soles and under your front mudguard."
total weight with hardware is 400g (14.11oz. ~ 0.88lb. US.)
Click on image at left for full screen high-resolution view
ONLY $64.00
UNIVERSAL
ALUMINUM
TRIALS footpeg set
Comes without hardware as shown in image below. Fits most brands and models of Trials motorcycles from the early 1990s to present day. (Fits all GasGas Trials and Pampera, 1992 to present day.)
Color red only - These footpegs were originally used on the GASGAS Trial RAGA model in the year 2008. Years ago all manufacturers standardized the footpeg mount configuration so these will fit almost every brand and model on the market for 20 years.
These are made of CNC billet machined aluminum with red anodized color coating. NOTE: These are far superior in every aspect to the cast aluminum sets sold by our competitors.
We invite you to compare our price to our competitors.
Uses your existing hardware for an easy and trouble-free installation.
This is a terrific update on older Trial bikes. Replaces the narrow and uncomfortable pegs for better control. It is amazing how much better wide foot platforms really are. Makes a great gift.
* These are the exact same OEM configuration and dimensions as used on all GASGAS Trial bikes since the 1999 model year.
(And Pampera model)
*dimensionally the same but the actual material and color may vary as some GASGAS models use steel or micro-fusion stainless steel in assorted colors and shades of gray.
Exact weight of this "bare" set is 181.3g (6.395oz. ~ 0.40lb. US.)
Click on image at left for full screen high-resolution view
ONLY $99.00
GASGAS
UNIVERSAL
EXHAUST PROTECTOR
(HEAT SHIELD)
IN CARBON FIBER
FITS GASGAS TRIALS MODELS INCLUDING THE PRO.
HIGH QUALITY CARBON FIBER WITH CLAMPS
ONLY $59.95
GASGAS
UNIVERSAL SILENCER (MUFFLER) FOR OLDER GASGAS MODELS (PRE 2000)
TRIALS MODELS
(NOT FOR THE PRO MODEL)
ONLY $279.00
For applications, watch this video
GASGAS
ADJUSTABLE RACING REAR SHOCK ABSORBER FOR GASGAS PRO MODELS
2002 AND NEWER, ALL TRIALS "PRO" MODELS
NOT FOR any GasGas models older than 2000.
ONLY $399.00
BY LAW, THIS PRODUCT WILL NOT SHIP BY AIR
Click on image at left to enlarge
GASGAS
ADJUSTABLE RACING REAR SHOCK ABSORBER FOR OLDER GASGAS MODELS (PRE 2000)
1991~1999, ALL GASGAS TRIALS MODELS
(NOT FOR THE PRO MODEL)
GASGAS RACING ALUMINUM SHOCK ABSORBER.
(MODELS PRIOR TO THE PRO)
LIMITED QUANTITIES, DISCONTINUED ITEM. WHILE SUPPLIES LAST
Click on image at left to enlarge
CLICK HERE FOR DIMENSIONAL DIAGRAM IMAGE
ONLY $350.00
BY LAW, THIS PRODUCT WILL NOT SHIP BY AIR.
Remanufactured "exchange" cylinder and piston kit.
For all GASGAS trial and Pampera models 1990 to present. *
Kit includes: Re-plated cylinder, new genuine GASGAS piston, piston rings, piston pin, clips, necessary gaskets and seals. Piston pin bearing sold separately.
About the re-plate process: Using a stripped and cleaned aluminum cylinder core, the same nikasil (Nickel Silicon Carbide) plating process as used by the GASGAS factory is applied by a world renowned USA company. The cylinder is then honed and matched to the supplied piston. With this method, the clearances are at absolute factory recommended specifications. For these reasons, we believe a re-plated matched piston and cylinder set is as good or better than new.
Turn around time: In most cases, our USA warehouse has these kits in stock. We typically ship the same day or very next business day after the core cylinder arrives. Overnight service is available at additional charge.
* A reusable matching GASGAS "core" cylinder of the exact year and model being purchased must be supplied in advance. Not suitable for return are cylinders from other brands of motorcycles, other engine sizes, or with damage including internal cracks, broken casting or stripped threads. Without a pre-returned core, a non-refundable core charge applies. (TXT 280 kit shown. Kit contents may vary depending upon application.)
For more information: Dealers
Click on image to enlarge.
HP2050102A Hand protectors in color matched blue for the GASGAS Pampera model.
Special feature: Roost protector wings on both sides for hydraulic master cylinders.
ONLY $74.95
Click on image to enlarge.
TRIAL CROSS BAR PAD
GasGas bar pads fit all standard trials handlebars.
GASGAS RED HR30009310R
GASGAS BLUE HR30009310A
GASGAS SILVER HR30009310P
ONLY $14.95
Click on images to enlarge.
ALUMINUM UNIVERSAL BAR END CAPS
HR2250201A Anodized matte BLUE finish
Aluminum Trials handlebar end plugs that expand to fit all popular aluminum trial handlebar interior diameters.
Special exclusive feature: Typical bar end plugs fit either the 12mm or 14mm interior diameter handlebar, and come only in the natural aluminum color.
These plugs are on liquidation and only blue remains.
ONLY $17.95
Click on image to enlarge.
PLASTIC UNIVERSAL BAR END CAPS
HR2250101A (BLUE)
HR2250101R (RED)
HR2250101Y (YELLOW)
Durable PLASTIC economy bar plugs.
Colors: Red, blue, black, or yellow.
Special exclusive feature: Typical bar end plugs fit either the 12mm or 14mm interior diameter handlebar. Typically, one must take apart the handgrip and determine the interior diameter of the handlebar in question before ordering. We have solved this dilemma, eliminated the possibility of error. These plugs fit any standard trials handlebar.
ONLY $11.50
Click on image to enlarge.
E100001 Throttle Assembly, Domino (white tube) Standard quick turn.
NOTE: As used by GASGAS since 1993, and almost all trial manufacturers. Assembly as shown in photo. The industry standard.
Special feature: Rugged proven design. We stock replacement parts.
ONLY $29.95
Click on image to enlarge.
BT280022065 Brake pad set, (4 piston HEBO Caliper), OEM front and/or rear on GASGAS TXT 1999~2003. (Original number was BT27922065) Also fits OEM rear brake on the 2002~2006 GASGAS Pampera. (Does NOT fit the GASGAS "Pro" model) Fits only the HEBO brand caliper.
AMA LEGAL.
For everything related to the hydraulic systems on all Trial motorcycles,CLICK HERE Fits caliper part numbers: BT27922000 and BT29722001
Click on image to enlarge.
BT280222065 Front brake pad set (4 piston caliper), OEM GASGAS TXT Pro 2002~2007, and most other manufacturers.
AMA LEGAL. Fits our most popular front caliper. Fits many late model trials machines with new style compact AJP four piston front caliper.
For everything related to the hydraulic systems on all Trial motorcycles,CLICK HERE Fits AJP caliper part number BT280222000
Click on image to enlarge.
BT280222068 Rear brake pad set (2 piston caliper), OEM GASGAS TXT Pro 2002~2007, and most other manufacturers.
AMA LEGAL. Fits the latest version of the AJP rear TRIAL caliper. Fits many late model trials machines with new style compact AJP two piston rear caliper.
For everything related to the hydraulic systems on all Trial motorcycles,CLICK HERE Fits AJP caliper part number BT280222001
Click on image to enlarge.
R235000 Front and/or rear brake pad set (2 piston caliper), OEM GASGAS 1990~1998, and most other manufacturers.
Also known as the "065" pad. Fits many 1980s and 1990s Aprilia, Beta, Fantic, Mecatecno, Merlin, Montesa, Scorpa, and Sherco with AJP or Brembo brand two piston calipers.
AMA LEGAL. AJP and BREMBO brand 2 piston TRIAL caliper.
For everything related to the hydraulic systems on all Trial motorcycles,CLICK HERE Fits caliper part numbers: R230001R240004 BT27722001
Click on image to enlarge.